Multi style surveillance camera IP
ONLY 0 LEFT
Power consumption (W): 6w
Power supply (V): 5V
Size (length x width x depth) (mm): 89-95 * 114MM
Video compression format: H.264
Minimum illumination (Lux): 0.01
Wall bracket: side
Power supply (V): 110-220V
Network interface: Wi-Fi / 802.11 / b / g
Alarm Action: FTP Photo
Video standard: PAL
Monitor image quality: 1280 * 720
Capture function: support
Supported mobile systems: Android, Symbian
Advantages: This product remote watch TF card content
Audio input: built-in 38dB microphone
Audio output: built-in 8 ohm, 1.5 watt speakers
Shooting modes: Manual recording, recording, recording
Video save: TF card, can support 64G
The package includes: 1 * camera, 1 * user manual, 1 * mounting base, 1 * mounting screw pack, 1 * a to micro usb, 1 * power adapter
Download and install the application
one. Make sure your mobile device is properly connected to the network (Wi-Fi);
For Android users, please download the free application program by searching for "netcam" in the Google Play store to scan the QR code on the camera;
C. For iPhone or iPad users, download the free application by searching for "netcam" in the "App Store" or QR code in the scan package.
2. Connect the IP camera
one. Install the Wi-Fi antenna. Tighten the antenna and point it above; (skip these steps to the built-in antenna device or integrated device).
Bay plugs into the network cameras power adapter;
C. connect the router (operating frequency: 2.4GHz, to ensure that the router DHCP open). Plug one end of the Ethernet cable into the router and the other end into the IP port of the IP camera. Wait about a minute while the camera is automatically connected to the router (skip these steps for devices that do not have an Ethernet port).
Can not connect to WIFI
Please make sure the WIFI password is correct.
2. Make sure that the router signal is stable (make the IP camera close to the router for the first time). At this point the camera will not be able to use the 5Ghz wireless standard. If you have a dual-band router, be sure to isolate your wireless channel and connect the camera to the 2.4GHz channel.
Check the network camera: Make sure the webcam sends a wait message after the plug. If not, we need to reset the camera.
1. Why reset: reset is used to enhance the IP camera system so that you can more efficiently receive and connect unknown routers.
Reset will clear all user settings, including WIFI information, access password, alarm information, arming information.
Steps: Locate the reset hole at the bottom of the device, insert it with a needle, hear "di" and hold it for more than three seconds. When you hear "reset to default" sound, reset it.
3. After reset, the user can start the connection via WIFI.
If you insert this ip camera, the camera has a Youtube.
Enligh language can be used: https: //www.youtube.com/watch? v = B0vtQFSryEI
Russian people can use: https: //www.youtube.com/watch? v = 3SPhftClY4I
If you have any questions about this camera, please contact us Thank you
people are currently looking at this product
Estimated delivery time 7-14 days